View AT-320240Q6FIQW_5263021.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

date : 200 6/ 9 / 12 ampire co., ltd. 1 specifications for lcd module customer customer part no. ampire part no. at - 320240q6f i q w - t 83 (v) (r) approved by date approved by checked by organized by a m p i r e
date : 200 6/ 9 / 12 ampire co., ltd. 2 record of revision revision date p age contents editor 200 6/ 9/12 -- new release tony
date : 200 6/ 9 / 12 ampire co., ltd. 3 1 features (1) display format : 320 240 dot - matrix, 1/240 duty. (2) construction : fstn lcd, tab type lcd driver, white edge led backlight, touch panel , touch panel controller ( tsc2046 ) and pcb. (3) display type : fstn ,transflective , 6 o?clock view. (4) controller : ra8835 . (5) new driving method cmos lcd driver for low power consumption driving. (6) 5v or 3.3v single power input. built - in specific power supplies circuit for lcd driving. ul tra low power consumption. (7) normal temperature type. (8) portrait(default) or landscape display type selectable by jumper setting. (9) 80 or 68 family mpu selectable by jumper setting (10) rohs compliant. 2 mechanical data parameter stand value unit dot size 0.225(w) 0.225(h) mm dot pitch 0.24(w) 0.24(h) mm viewing area 62.0 (w) 81.8 (h) mm module size 85.0 (w) 99.3 (h) 6. 7 max (t) mm module size (w/ touch panel) 85.0 (w) 99.3 (h) 8 .6 max (t) mm 3 absolute maximum ratings parameter symbol mi n max unit logic circuit supply voltage vdd - vss - 0.3 7.0 v lcd driving voltage -- - 0.3 2 8.0 v input voltage v i - 0.3 vdd+0.3 v operating temp. t op 0 5 0 c normal . type storage temp. t stg - 2 0 7 0 c
date : 200 6/ 9 / 12 ampire co., ltd. 4 4 electro - optical characteristics parameter sym bol condition min typ max unit note ----- electronic characteristics ----- logic circuit supply voltage vdd - vss -- 2.7 -- 5.5 v 0 c 22.7 2 2 . 9 2 4 .1 25 c 20.7 2 1 . 8 22.9 lcd driving voltage -- 5 0 c 1 9 .8 20 .8 2 1 .8 v 0~ 5 0 c for normal temp. type vih -- 0.7 vdd -- vdd v input voltage vil -- vss -- 0.3 vdd v logic supply current icc -- -- t.b.d -- ma ----- optical characteristics ----- contrast cr fstn type 2 5 note 1 ( ? ) rise time tr 25 c -- 170 255 ms fall time tf 25 c -- 380 570 ms note 2 ( ? ) q f 40 -- -- q b 25 -- -- q l 30 -- -- viewing angle range q r 25 c & cr 3 2 40 -- -- deg. note 3 ( ? ) frame frequency ff 25 c -- 70 -- hz ( ? ) ----- white led bac k - light characteristics ----- parameter symbol condition min typ max unit note forward current i f -- -- 60 80 ma note 4 lcm luminous intensity (full white pattern) if=60ma -- 2.5 -- cd/ m 2 note 4 forward voltage vf if=60ma -- 3.2 3.5 v note 5 note 4: luminous intensity is decided by forward current of white led. note 5: white leds are with voltage tolerance. please keep the if between 60~80ma a k luminous intensity is decided by if ( ? )these data need to be determined. * led dice number = 4 3.2v/60ma
date : 200 6/ 9 / 12 ampire co., ltd. 5 (note 1) contrast ratio : cr = (brightness in off state) / (brightness in on state) ( note 2 ) response time : (note 3) viewing angle touch panel electrical specification parameter specification condition 400 w ~ 800 w x axis on re sistance 260 w ~ 600 w y axis insulating resistance more than 10m w dc 25 v chattering less than 15 ms 100k w pull - up
date : 200 6/ 9 / 12 ampire co., ltd. 6 5 block diagram com. driver lcd panel 320 x 240 dots seg. driver 320 240 cp,d0~d3 lp, m, ydis flm controller ra8835 sram /reset /rd /wr /cs a0 db0~7 from mpu * please use the ydis pin and the inner command of the ra8835 to cont rol display on/off. power supply example lcd module vss vctl vr 0 v vcc lcd power circuit new driving method lcd driver 21.8v note: vctl is about 0.4v 6 interface definition pin no. signal level function 1 /reset h/l reset signal 2 /rd h/l 80 series: read signal 68 series: enable signal(e)
date : 200 6/ 9 / 12 ampire co., ltd. 7 3 /wr h/l 80 se ries: write signal 68 series: r/w signal 4 /cs h/l chip select signal 5 a0 h/l data type selection 6 ~ 13 db0~db7 h/l data input(8 bits) 14 v dd - power supply for logic(+ 5 or 3. 3 v) 15 vss - power supply(ground : 0v) 16 vctl - contrast adjustment input 17 nc - no connection 18* sk / x1 - serial clock touch panel left signal in x axis 19* do / x2 - serial data output touch panel right signal in x axis 20* di / y1 - serial data input touch panel upper signal in y axis 21* cs / y2 - t/p controller chip select. active low touch panel lower signal in x axis 22* int - pen interrupt 23 a - led anode 24 k led cathode * 18~22 : sk, do, di, cs, int for touch panel controller tsc2046 / x1, x2, y1, y2 for touch panel (without tsc2046 )
date : 200 6/ 9 / 12 ampire co., ltd. 8 7 timing characteristics 7.1 8080 family interface timing parameter condition symbol min max unit remark address hold time tah8 10 n s address setup time taw8 0 ns a0,/cs system cycle time tcyc note ns strobe pulse width toc 150 ns /wr,/rd data setup time tds8 120 ns data hold time tdh8 5 ns /rd access time tacc8 - 80 ns output disable time cl=100 pf vdd=2.7~4.5 toh8 10 55 ns db0~db7 note: for memory control and system control commands: tcyc8=2tc+toc+tcea+75 > tacv +245 for all other commands: tcyc8=4tc+toc+30 a0,/cs /wr,/rd db0~db7 (write) db0~db7 (read)
date : 200 6/ 9 / 12 ampire co., ltd. 9 7.2 6800 family interface timing parameter condition symbol min max unit remark system cycle time tcyc6 note ns address setup time taw6 10 ns address hold time tah6 0 ns a0,/cs, r/w data setup time tds6 120 ns data hold time tdh6 0 ns output disable time toh6 10 75 ns access time tacc6 - 130 ns db0~db7 enable pulse width cl=100 pf vdd=2.7~4.5 tew 150 - ns e note: for memory control and system control commands: tcyc6=2tc+tew+tcea+75 > tacv +245 for all other commands: tcyc6=4tc+tew+30 ac electrical characteristics e r/w a0, /cs db0~db7 (write) db0~db7 (read)
date : 200 6/ 9 / 12 ampire co., ltd. 10 8 instruction set code command read parameters class command /rd /wr a0 d7 d6 d5 d4 d3 d2 d1 d0 hex comm and description number of byters section system set 1 0 1 0 1 0 0 0 0 0 0 40 initialized device and display 8 8.2.1 system control sleep in 1 0 1 0 1 0 1 0 0 1 1 53 enter standby mode 0 8.2 .2 disp on/off 1 0 1 0 1 0 1 1 0 0 d 58, 59 enable and disable display and display flashing 1 8.3.1 scroll 1 0 1 0 1 0 0 0 1 0 0 44 set display start address and display regions 10 8.3.2 csrform 1 0 1 0 1 0 1 1 1 0 1 5d set cursor byte 2 8.3.3 cgram addr. 1 0 1 0 1 0 1 1 1 0 0 5c set start address of character generator ram 2 8.3.6 csrdir 1 0 1 0 1 0 0 1 1 cd 1 cd 0 4c to 4f set direction of cursor movement 0 8.3.4 hdot scr 1 0 1 0 1 0 1 1 1 0 5a set horizontal scroll position 1 8.3.7 display control ovlay 1 0 1 0 1 0 1 1 0 1 1 5b set display overlay format 1 8.3.5 csrw 1 0 1 0 1 0 0 0 1 1 0 46 set cursor address 2 8.4.1 drawing control csrr 1 0 1 0 1 0 0 0 1 1 1 47 read cursor address 2 8.4.2 mwrite 1 0 1 0 1 0 0 0 0 1 0 42 write to display memory - 8.5.1 memory control mread 1 0 1 0 1 0 0 0 0 1 1 43 read from display memory - 8.5.2 note: 1. in general, the internal registers of the ra8835 are modified as each command parameter is input. however, the microprocessor does not have to set al l the parameters of a command and may send a new command before all parameters have been input. the internal registers for the parameters that have been input will have been changed but the remaining parameter registers are unchanged. 2 bytes parameters( where two bytes are treated as 1 data item) are handled as following: a. csrw, csrr: each byte is processed individually. the microprocessor may read or write just the low byte of the cursor address. b. system set, scroll, cgram adr. : both parameter bytes are processed together. if the command is changed after half of the parameter has been input, the single byte is ignored. 2. apl and aph are 2 - byte parameters, but are treated as two 1 - byte parameters. 3. please refer to ra8835 lcd controller data book for detai l.
date : 200 6/ 9 / 12 ampire co., ltd. 11 9 inner data format com1 com240 #1 d3 d3 d3 d3 #2 d2 d2 d2 d2 d1 d1 d1 d1 d0 d0 d0 d0 d3 d3 d2 d2 d2 d1 d1 d1 #320 d0 d0 d0 portrait display type (top view) 3ruwudlwprgh -3 -3 fxw vkruw /&' seg1 seg320 #1 d3 d2 d1 d0 d3 d2 - d3 d2 d1 d0
date : 200 6/ 9 / 12 ampire co., ltd. 12 #2 d3 d2 d1 d0 d3 d2 d3 d2 d1 d0 #240 d3 d2 d1 d0 d3 d2 d3 d2 d1 d0 landscape display type(top view) $%& /dqg6fdshprgh -3 -3 fxw vkruw /&' * rega rdless portrait or landscape type, both are 1/240 duty. the only difference is the opposite scan direction on common driver. the character mode of ra8835 could only be used on landscape type. the character will be mirrored on portrait type. 10 jumper settin g item option jumper setting remark portrait (default) pin 1,2 short on jp1&jp2 display type landscape pin 2,3 short on jp1&jp2 80 family (default) pin 1,2 short on jp4 mpu 68 family pin 2,3 short on jp4
date : 200 6/ 9 / 12 ampire co., ltd. 13 11 quality and reliability 11.1 test conditio ns tests should be conducted under the following conditions : ambient temperature : 25 5 c humidity : 60 25% rh. 11.2 sampling plan sampling method shall be in accordance with mil - std - 105e , level ii, normal single sampling pla n . 11.3 acceptable quality level a major defect is defined as one that could cause failure to or materially reduce the usability of the unit for its intended purpose. a minor defect is one that does not materially reduce the usability of the unit for it s intended purpose or is an infringement from established standards and has no significant bearing on its effective use or operation. 11.4 appearance an appearance test should be conducted by human sight at approximately 30 cm distance from the lcd mo dule under fluorescent light. the inspection area of lcd panel shall be within the range of following limits.
date : 200 6/ 9 / 12 ampire co., ltd. 14 11.5 inspection quality criteria item description of defects class of defects acceptable level (%) function short circuit or pattern cut major 0. 65 dimension deviation from drawings major 1.5 ave . dia . d area a area b d 0.2 disregard 0.2 0.5 for n = 1 minor 2.5 color uniformity rain bow color or n ewton ring. minor 2.5 glass scratches obvious visible damage. minor 2 .5 contrast ratio see note 1 minor 2.5 response time see note 2 minor 2.5 viewing angle see note 3 minor 2.5 zone a active area zone b viewing area
date : 200 6/ 9 / 12 ampire co., ltd. 15 11.6 reliability test conditions test item normal temp. type extended temp. type note high temperature operat ion 50 3 c , t= 96 hrs 70 3 c , t= 96 hrs low temperature operation 0 3 c , t= 96 hrs - 2 0 3 c , t= 96 hrs high temperature storage 7 0 3 c , t= 96 hrs 8 0 3 c , t= 96 hrs 1,2 low temperature storage - 2 0 3 c , t= 96 hrs - 3 0 3 c , t= 96 hrs 1,2 thermal shock tes t - 20 c ~ 25 c ~ 70 c 30 m in. 5 min. 30 min. ( 1 cycle ) total 5 cycle - 30 c ~ 25 c ~ 80 c 30 min. 5 min. 30 min. ( 1 cycle ) total 5 cycle 1,2 humidity test 40 c, humidity 90%, 96 hrs 1,2 vibration test (packing ) sweep frequency : 10 ~ 55 ~ 10 hz/1min amplitude : 0.75mm test direction : x.y.z/3 axis duration : 30 min/each axis 2 note 1 : condensation of water is not permitted on the module. note 2 : the module should be inspected after 1 hour storage in normal conditions (15 - 35c , 45 - 65%rh). definitions of life end point : l current drain should be smaller than the specific value. l function of the module should be maintained. l appearance and display quality should not have degraded noticeably. l contrast rat io should be greater than 50% of the initial value.
date : 200 6/ 9 / 12 ampire co., ltd. 16 12 handling precautions (1) a lcd module is a fragile item and should not be subjected to strong mechanical shocks. (2) avoid applying pressure to the module surface. this will distort the glass and cause a chang e in color. (3) under no circumstances should the position of the bezel tabs or their shape be modified. (4) do not modify the display pcb in either shape or positioning of components. (5) do not modify or move location of the zebra or heat seal connectors. (6) the device should only be soldered to during interfacing. modification to other areas of the board should not be carried out. (7) in the event of lcd breakage and resultant leakage of fluid do not inhale, ingest or make contact with the skin. if contact is made rinse im mediately. (8) when cleaning the module use a soft damp cloth with a mild solvent, such as isopropyl or ethyl alcohol. the use of water, ketone or aromatic is not permitted. (9) prior to initial power up input signals should not be applied. (10) protect the module agai nst static electricity and observe appropriate anti - static precautions.
date : 200 6/ 9 / 12 ampire co., ltd. 17 13 outline dimension ? t 1 a? 1q ?a??~?1 ffc ?|?m

▲Up To Search▲

Price & Availability of AT-320240Q6FIQW

	To Download AT-320240Q6FIQW Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .